Type
Seamless copper coated wire Type P1
classification
AWS
A 5.23: F8A4-ECA1
EN ISO
24598-A: S T Mo FB
Anwendungen
SA CW Mo is a cored wire for 0.5%Mo steels, i.e. P1. These steels are commonly used at service temperatures up to 500 °C and for some sub-zero structural applications.
Type
Seamless copper coated wire Type P1
Anwendungen
SA CW Mo is a cored wire for 0.5%Mo steels, i.e. P1. These steels are commonly used at service temperatures up to 500 °C and for some sub-zero structural applications.
Eigenschaften

The 0.5% alloying improves creep performance compared to CMn steels and sees the alloy being used for boiler, pressure vessel and piping construction.
Typical with FL 155 Flux or FL 160

Klassifikation
AWS
A 5.23: F8A4-ECA1
EN ISO
24598-A: S T Mo FB
F-nr
6
FM
4
Geeignet für

S355J0, E335, P285NH, P310GH, S355J0Cu, 16Mo3, P315N - S420N, P315NH - P420NH fine grain structural steels up to S460N/P460N, large-diameter pipes up to L485MB

Schweißpositionen
PA
PB
PC
Rücktrocknung
Not required
Analyse
C Si Mn P S Cr Ni Mo Nb Ti V N Cu Al Zr Nb+Ta
0.1 0.2 0.09 0.02 0.02 0.5
Mechanische Gütewerte
Heat
Treatment		 RP0,2
(MPa)		 Rm
(MPa)		 A5
(%)		 Impact Energy (J) ISO-V Hardness
-20°C -40°C
675°C- 705°C 1h 490 570 24 120 80 HRc
Produktblatt
Konformitätserklärung
Produktblatt
Bitte um Angebot