Soudokay A 43-O

Brand
Soudokay
Ceweld product
Type
Fluxcored hardfacing welding wire based on high Carbon, Chrome and Niobium
classification
EN ISO
14700: T Fe15
DIN
8555: MF 10-GF-60-G
Applications

Cladding and rebuilding parts that are subject to severe abrasion.

Type
Fluxcored hardfacing welding wire based on high Carbon, Chrome and Niobium
Applications

Cladding and rebuilding parts that are subject to severe abrasion.

Properties

Extreme abrasion resistant with reasonable impact properties and temperature resistance up to 300ºC. Due to the combination Cr and Nb carbides the deposit structure contains very fine particles that results in excellent wear resistance against heavy abrasion. Usualy the maximum number of layers is 2 till 3 but when using a special stringer build up technick with release cracks, upto 15 layers is also possible.

Classification
EN ISO
14700: T Fe15
DIN
8555: MF 10-GF-60-G
Suitable for

Sand and earth moving equipment such as buckets and teeth, dredge buckets, coke hammers, crushing equipment, rockwool rolls and brick industry, cement rollers, tables, Nihard and Mohard parts without buffer layer, slurry pumps, loaders, wear plates etc.

Equivalent in SMAW: CEWELD® Dur 62S, Dur 63Nb

Welding positions
PA
PB
PC
Redrying
140°C / 24 hr
Analysis
C Si Mn Cr Ni Mo Nb Ti V N Fe W B Co Cu Al
5 1 0.4 22 7 Rem.
Mechanical Properties
Heat
Treatment		 RP0,2
(MPa)		 Rm
(MPa)		 A5
(%)		 Hardness
As Welded 62 HRc
Product sheet
MSDS
product sheet
Ask quotation
MSDS