Type
High alloyed seamless flux cored wire for hardfacing against extreme abrasion.
classification
EN ISO
14700: T ZFe13
DIN
8555: MF 10-GF-70-G
Applications

Rebuilding wornout parts or protecting new machine parts to increase life that suffer from extreme abrasive wear

Type
High alloyed seamless flux cored wire for hardfacing against extreme abrasion.
Applications

Rebuilding wornout parts or protecting new machine parts to increase life that suffer from extreme abrasive wear

Properties

High C-, Cr-, B-alloyed flux-cored wire electrode which forms extremely hard carbides for extremely hard deposits on parts subject to excessively heavy abrasive wear weldable with and without protective gas. Extreme good wear resistance due to excelent first layer hardness properties. More than 1 or 2 layers should not be deposited. A Buffer layer with OA 4370 or OA MnCr is recommended in case of old layers or critical base metals..

Classification
EN ISO
14700: T ZFe13
DIN
8555: MF 10-GF-70-G
Suitable for

60-70 HRc Hardfacing wire used in mining, agriculture and steel mills, conveyor chains, agriculture, construction, mixer blades, paddles, cement pumps with excelent abrasion and wear resistance against sand and minerals

Welding positions
PA
PB
PC
PF
Redrying
Not required
Hardness HRc
first layer: 60-64HRc, second layer 65-70HRc
Analysis
C Si Mn Cr Ni Mo Nb Ti V N Fe W B Co Cu Al
1.8 0.6 0.8 8.2 Rem. 4.2
Mechanical Properties
Heat
Treatment		 RP0,2
(MPa)		 Rm
(MPa)		 A5
(%)		 Hardness
As Welded 64 HRc
Product sheet
declaration of conformity
SDS
Product sheet
Ask quotation
SDS