SAS 309 LMo | Certilas: The filler metal specialist

Go Back

PRODUCT SPECIFICATIONS
PACKAGING
Ask quotation

Type

Sintered stainless steel strip for cladding overlay applications. (Type 309LMo, 23 12 2, 1.4459)

classification

AWS

A 5.9: EQ309LMo

EN ISO

14343-A: S 23 12 2 L

W.Nr.

1.4459

Applications

SAS 309LMo strip is stainless steel strip for cladding overlay applications and joining. Combined with our high basic electro slag flux FL 830 ESHC excellent results are obtained in both deposition rate as minimum dilution rate due to the higher slag temperature compare to other electro slag fluxes. Boilers, chemical industry components, offshore industry.

Type

Sintered stainless steel strip for cladding overlay applications. (Type 309LMo, 23 12 2, 1.4459)

Applications

SAS 309LMo strip is stainless steel strip for cladding overlay applications and joining. Combined with our high basic electro slag flux FL 830 ESHC excellent results are obtained in both deposition rate as minimum dilution rate due to the higher slag temperature compare to other electro slag fluxes. Boilers, chemical industry components, offshore industry.

Properties

Cladding on low alloyed steels in case a 18/8/2 (AISI 316) CrNiMo layer is required in the first layer.

Classification

AWS

A 5.9: EQ309LMo

EN ISO

14343-A: S 23 12 2 L

F-nr

6

FM

5

W.Nr.

1.4459

Suitable for

Strip cladding on low alloyed steels in case a 18/8/2 CrNiMo (AISI 316) layer is required in the first layer.

W.Nr: 1.4401, 1.4404, 1.4406, 1.4410, 1.4437, 1.4571, 1.4580

Welding positions

Redrying

Not required

Gas acc. EN ISO 14175

None

Product sheet

declaration of performance

declaration of conformity

Product sheet

SAS 309 Lmo

Disclaimer

Whilst all reasonable efforts have been made to ensure the accuracy of the information contained, the information contained or otherwise referenced herein is presented only as “typical” without guarantee or warranty, and any liability incurred from any reliance thereon is expressively disclaimed. Typical data are those obtained when welded and tested in accordance to prescribed standards, and should not be assumed to be the expected results in a particular application or weldment. Other tests and procedures may produce different results. Users are cautioned to confirm by qualification testing, or other appropriate means, the suitability of any welding consumable and procedure before use in the intended application. The selection and use of specific products is solely within the control of, and remains the sole responsibility of the customer. The right to change design and/or specifications without notice is reserved.