EnDOtec DO*30
Marque
Ceweld product
Type
High alloyed seamless metal cored wire for hardfacing against extreme abrasion.
classification
EN ISO
14700: T ZFe13
DIN
8555: MF 10-GF-70-G
Applications
Rebuilding wornout parts or protecting new machine parts to increase life that suffer from extreme abrasive wear
Type
High alloyed seamless metal cored wire for hardfacing against extreme abrasion.
Applications
Rebuilding wornout parts or protecting new machine parts to increase life that suffer from extreme abrasive wear
Propriétés
High C-, Cr-, B-alloyed flux-cored wire electrode which forms extremely hard carbides for extremely hard deposits on parts subject to excessively heavy abrasive wear weldable with and without protective gas. Extreme good wear resistance due to excelent first layer hardness properties. More than 1 or 2 layers should not be deposited. A Buffer layer with OA 4370 or OA MnCr is recommended in case of old layers or critical base metals..
Classification
EN ISO
14700: T ZFe13
DIN
8555: MF 10-GF-70-G
Convient pour
60-70 HRc Hardfacing wire used in mining, agriculture and steel mills, conveyor chains, agriculture, construction, mixer blades, paddles, cement pumps with excelent abrasion and wear resistance against sand and minerals
Positions de soudage
Note title
Hardness HRc
first layer: 60-64HRc, second layer 65-70HRc
Propriétés mécaniques
| Heat Treatment |
RP0,2 (MPa) |
Rm (MPa) |
A5 (%) |
Hardness |
|---|---|---|---|---|
| As Welded | 64 HRc |