Type
Seamless copper coated wire Type P1
classification
AWS
A 5.23: F8A4-ECA1
EN ISO
24598-A: S T Mo FB
Applications
SA CW Mo is a cored wire for 0.5%Mo steels, i.e. P1. These steels are commonly used at service temperatures up to 500 °C and for some sub-zero structural applications.
Type
Seamless copper coated wire Type P1
Applications
SA CW Mo is a cored wire for 0.5%Mo steels, i.e. P1. These steels are commonly used at service temperatures up to 500 °C and for some sub-zero structural applications.
Propriétés

The 0.5% alloying improves creep performance compared to CMn steels and sees the alloy being used for boiler, pressure vessel and piping construction.
Typical with FL 155 Flux or FL 160

Classification
AWS
A 5.23: F8A4-ECA1
EN ISO
24598-A: S T Mo FB
F-nr
6
FM
4
Convient pour

S355J0, E335, P285NH, P310GH, S355J0Cu, 16Mo3, P315N - S420N, P315NH - P420NH fine grain structural steels up to S460N/P460N, large-diameter pipes up to L485MB

Positions de soudage
PA
PB
PC
Etuvage
Not required
Analyse
C Si Mn P S Cr Ni Mo Nb Ti V N Cu Al Zr Nb+Ta
0.1 0.2 0.09 0.02 0.02 0.5
Propriétés mécaniques
Heat
Treatment		 RP0,2
(MPa)		 Rm
(MPa)		 A5
(%)		 Impact Energy (J) ISO-V Hardness
-20°C -40°C
675°C- 705°C 1h 490 570 24 120 80 HRc
fiche produit
déclaration de conformité
fiche produit
demander un devis