E NiCro 690 | Certilas: The filler metal specialist

Go Back

productspecificaties
Verpakkingen
vraag offerte

Type

Nickel based high basic SMAW welding electrode. ( Type Alloy 690)

classification

AWS

A 5.11: ENiCrFe-7

EN ISO

14172: Ni 6152 NiCr30Fe9Nb

Toepassingen

CEWELD E NiCro 690 electrodes are used for welding of nickel-chromium-iron Inconel alloys 690 to themselves and 600 steels. Also for heterogeneous stainless and low-alloy steels. Soft arc, easily detachable slag, regular beads. Nuclear power plants, chemical industry.

Type

Nickel based high basic SMAW welding electrode. ( Type Alloy 690)

Toepassingen

CEWELD E NiCro 690 electrodes are used for welding of nickel-chromium-iron Inconel alloys 690 to themselves and 600 steels. Also for heterogeneous stainless and low-alloy steels. Soft arc, easily detachable slag, regular beads. Nuclear power plants, chemical industry.

Eigenschappen

CEWELD E NiCro 690 has a higher Cr content which improves resistance to stress-corrosion cracking in the nuclear, pure water enviroment.

Classificatie

AWS

A 5.11: ENiCrFe-7

EN ISO

14172: Ni 6152 NiCr30Fe9Nb

F-nr

43

FM

6

Geschikt voor

Alloy 690, UNS W86152, NiCrFe-7

Inconel 690, VDM Alloy 690, Nicrofer 6030 N, FM 52, 2.4642, NiCr29Fe, Inconel 600, NiCr30Fe9Nb

Lasposities

Herdrogen

Not required

Analyse

C	Si	Mn	P	S	Cr	Ni	Mo	Nb	Ti	V	Fe	W	Co	Cu	Al	Nb+Ta
0.04	0.5	4			29	Rem.	0.3	1.5			7

Mechanische waarden

Heat Treatment	R_P0,2 (MPa)	Rm (MPa)	A5 (%)	Impact Energy (J) ISO-V	Hardness
Heat Treatment	R_P0,2 (MPa)	Rm (MPa)	A5 (%)	RT	Hardness
As Welded	430	650	40	110	HRc

productblad

prestatieverklaring

conformiteitsverklaring

VIB

productblad

VIB

Welding electrode for inconel 690

Disclaimer

Whilst all reasonable efforts have been made to ensure the accuracy of the information contained, the information contained or otherwise referenced herein is presented only as “typical” without guarantee or warranty, and any liability incurred from any reliance thereon is expressively disclaimed. Typical data are those obtained when welded and tested in accordance to prescribed standards, and should not be assumed to be the expected results in a particular application or weldment. Other tests and procedures may produce different results. Users are cautioned to confirm by qualification testing, or other appropriate means, the suitability of any welding consumable and procedure before use in the intended application. The selection and use of specific products is solely within the control of, and remains the sole responsibility of the customer. The right to change design and/or specifications without notice is reserved.